Patina Rivoli Drops

Creating the Patina Rivoli Drops:

These Patina Rivoli Drops are made with Swarovski Round Stones & Beads in the Crystal Black Patina effect for an elegant and classy look.



  • 2 Add a bead ear wires TierraCast® 90-1120-00
  • 2 14mm Faceted Rivoli link TierraCast® 94-3153-61
  • 2 12mm twisted round 1-3 Rivoli frame TierraCast® 94-3121-61
  • 8 4mm jump rings
  • 2” 20 gauge wire
  • Two part epoxy


  • Flat Nose Pliers
  • Round Nose Pliers
  • Wire Cutters


Step 1: Mix the two-party epoxy glue according to the instructions on the package. Place a small amount of glue in the center of the 14mm Faceted Rivoli link. Press the Swarovski 14mm Round Stone, art. 1122 Crystal Black Patina in the center of the link. Press the stone to secure in the link. Repeat with the other 14mm Faceted link as well as the two 12mm Twisted Round 1-3 Rivoli frames using the Swarovski 12mm Round Stones. Set aside and allow to dry as indicated in the glue instructions.

Step 2: Attach one 4mm jump rings to four of the Swarovski Pendants art. 6010 Crystal Black Patina. Attach each one to the two end loops on the 12mm Twisted Round 1- 3 Rivoli frames. Attach two 4mm jump rings to the remaining two Swarovski Pendants art. 6010 and attach these to the two middle loops of the 12mm Rivoli frame.

Step 3: Turn a loop at the bottom of the 20 gauge wire. Slide the Swarovski Bead art. 5040 8mm Jet onto the wire and turn a loop at the other end. Repeat this step once. Attach one loop of one beaded wire to the top loop of the 12mm Rivoli frame and to one loop of the 14mm Faceted Rivoli link. Repeat for the other earring.

Step 4: Attach the Swarovski Bead art. 5040 4mm Jet to the Add a Bead ear wire and attach the ear wire to the top loop of the 14mm Faceted link. Repeat for the other earring.

Tip: Use various colors and coatings of the Swarovski Round Stone art. 1122 to create these Patina Rivoli Drops to go with everything in your closet!

Categories: Projects

Tags: ,,

Leave A Reply