Shimmering Sheik

SUPPLIES

ITEM AMOUNT SIZE COLOR
BEADS (5000) 8 6mm YELLOW OPAL
FLAT BACKS 1 SS34 YELLOW OPAL F
FLAT BACKS 8 SS20 CITRINE SHIMMER F
FLAT BACKS 8 SS40 HYACINTH SHIMMER F
TOGGLE CLASP 1 n/a BRASS
CABLE CHAIN 2″ 6x4mm BRASS
TASSELS 3 1″ HOT PINK
WIRE 8″ 20 gauge SILVER
JUMP RINGS 3 Small SILVER
FLORAL FLAT FILIGREE 12″ n/a SILVER
TWO PART EPOXY GLUE n/a n/a n/a

INSTRUCTIONS

Step One: Using one 2088 ss34 yellow opal glue to center of the filigree. Then glue the eight 2088 ss20 Citrine Shimmer on the inner circle of the filigree. Then glue the eight 2088 ss40 Hyacinth Shimmer on the outer circle of the filigree. Let cure for 24 hours.

Step Two: Cut the Artistic Wire into 8 1” pieces. Using one piece of wire make a simple loop, slide on one 5000 6mm yellow opal and make a simple loop to close. Repeat 7 more times and set aside.

Step Three: Cut the cable chain into 10 2” pieces and set aside.

Step Four: Attach one piece of chain to the top point on the filigree from Step 1. Then attach one yellow opal component made in Step 2. Repeat 4 more times ending with chain. Attach one end of Classic Toggle. Repeat for second side of necklace.

Step Five: At the bottom of the filigree find the center point and add on one tassel. Add one more one either side of the original point of the filigree.

Categories: Projects

Tags: ,,,,,

Leave A Reply