|CRYSTAL PEARLS||26||12mm||CRYSTAL IRIDESCENT RED|
|RIVOLIS||3||14mm||CRYSTAL ROYAL GREEN|
|FACETED RIVOL FRAME||3||14mm||SILVER|
|OVAL JUMP RINGS||10||Medium||SILVER|
|TWO PART EPOXY||n/a||n/a||n/a|
Step One: Using the Shiny Green Rivoli glue into the Faceted Rivoli frame. Repeat 2 more times and set aside to cure.
Step Two: Cut the wire into 26 1.5″ pieces and set aside.
Step Three: Using one piece of wire, make a simple loop, slide on one pearl and make a simple loop to close. Repeat 25 more times and set aside.
Step Four: Using the Rivoli component made in Step 1 attach to one Medium Hammertone ring using an oval jump ring. Repeat 2 more times and set aside.
Step Five: Start with the lobster clasp and one pearl made in Step 3. Attach together. Now continue attaching pearl components until you have added 11 more. Using a jump ring attach the component made in Step 4. Use a second jump ring to attach another pearl component (letting the Shiny Green Rivoli component drop down). Repeat 2 more times.
Step Six: Now add 11 more pearl components and a jump ring at the opposite end to create the closure.